Idiomas disponibles
Idiomas disponibles
Connection of pipelines
The dimension of multifunction valve & the inlet/outlet pipe is ½".
Connection of multifunction valve: install the multifunction valve with the heater
on the inlet of the water heater.
In order to avoid leakage when connecting the pipelines, the rubber seal gaskets
provided with the heater must be added at the end of the threads. Ensure leak
proof joints.
Typical single outlet connection
hot water outlet
screw for hot water outlet
adjusting handle
for mixing valve
cold water inlet
one-way safety valve
pressure release hole
shower nozzle
Fig. 3
joint screw for
cold water inlet
EN
23
