Idiomas disponibles
Idiomas disponibles
EN-US
Features
Thank you so much for choosing a Stetsom product!
The PA2500.2 was developed to meet the most demanding in low
frequencies with deep and intense bass, as well as well defined mid and
high frequencies. Its electronic circuit has two pre-equalized channels:
Record EQ and Medium EQ. Each of these channels internally has a three-
band equalizer with defined frequencies and gains to make your sound
more prominent, in addition to the FLAT channel that allows amplification
of the sound fully balanced.
Before installing
Please read this manual carefully.
▪ All product connections must be made with the product turned OFF.
▪ A fuse must be installed between the amplifier and the battery is required
to protect against overcharging. The fuse has to be installed as close to the
battery as possible. Check the proper fuse for the amplifier according to its
consumption.
▪ Use gauges recommended in this manual to avoid the overheating of the
cables to obtain maximum power.
▪ Keep the cables as short as possible to increase sound fidelity and avoid
potential power losses.
▪ Route the installation cables as far away as possible from the original
vehicle wiring as it may cause interference and noise in your audio system.
▪ Perform the installation in a firm, ventilated and dry place.
▪ Installation must be done by a qualified professional.
If you have questions , contact the store where the purchase or
installation was made. For more information please contact our
Customer Service: BR +55 18 2104-9412.
11
