10. Connect the Electrical Supply Wires
WARNING: Risk of electric shock. A qualified electrician should make all electrical connections.
WARNING: Risk of electric shock. Disconnect the power before performing the following procedures.
NOTICE: A qualified electrician must install the 120 VAC, 15 A, Class A GFCI* protected circuit.
Connect the electrical supply wires to the cabinet electrical wires following the wiring diagram.
Reinstall the electrical enclosure cover onto the electrical enclosure. Secure with the two screws using a Phillips
screwdriver.
*Outside North America, this may be known as a Residual Current Device (RCD).
Kohler Co.
White (N)
Wire Connector
120 VAC, Class A, 15 Amp
GFCI/RCD Protected Circuit
15
Green and Yellow (G)
Black (L)
1558797-2-B