Idiomas disponibles
Idiomas disponibles
9. Install the Cabinet - Recess-Mount Installation
CAUTION: Risk of personal injury. This product is heavy. Get assistance lifting and moving the product.
NOTE: The following instructions are for recess-mount installation only. For surface-mount installation, refer to the
"Surface-Mount Installation" sections.
With help, lift and hold the cabinet in the cutout.
Insert the electrical wires through the back of the cabinet at the location identified in the "Roughing-In" section.
Pull the electrical wires through the cabinet side hole.
Secure the cabinet to the side framing with the four provided ST3.9X40 screws.
Press the provided screw caps over the screws.
1558797-2-B
14
Kohler Co.
