Franke FMA 654 I F KL BK Manual De Uso página 11

Pause function This function allows you to pause/restart any active function on the hob, by reducing the power
available in the cooking zone and resetting all the functions.
During the pause, all the digits indicate
- No energy is produced in any of the cooking areas.
- All functions and the timer are disabled.
To enable: with the hob on, press and hold
To disable: press and hold
along the swipe keyboard which shows an animation.
Recall function
This function is used to recall the function settings of the hob if it is switched off by mistake using
.
With the hob off, to recover the settings press
seconds. A beep is emitted to confirm the operation.
When the hob is off, if it is not turned back on within 6 seconds, the settings of the previous func-
tions are lost.
Heating function This function is used to heat a pan to the maximum power before continuing to cook at a selected
level. The time interval for which the cooking zone is held at maximum power depends on the final
cooking level that has been set. See the table:
Power level
1
2
3
4
5
6
7
8
9
Boost
Select one of the 4 cooking areas and press and hold the selected value (from 1 to 8) on the swipe
keyboard for 3 seconds. The hob will have a maximum power peak for a period of time that varies
according to the previously set cooking power, then it will go back to the value set at the beginning.
The corresponding digit indicates
Combo mode ("bridge" This function allows 2 cooking areas to be combined to use and control them as if they were one
function) and have a bigger cooking area at your disposal. This function allows you to use pans with a wider
base.
The cooking zones that can be selected for this function are both those on the left and those on the
right.
To enable: press both cooking zones simultaneously until a digit indicates
To set the power of the zone that can be used in combined mode, use the swipe keyboard.
To disable: simultaneously press the keys used to enable the "bridge" function until the symbols
disappear.
Important! The hob automatically recognises the presence of a larger pan that occupies two cook-
ing areas, but it will manage the areas separately unless the "bridge" function is enabled.
Heating function This function is used to keep cooked foods warm.
To enable/disable: select a cooking zone and select 0 or 1 on the scroll bar displaying
corresponding digit.
to inform the user that:
for at least 1 second.
for at least 1 second and slide your finger from minimum to maximum
Timer (seconds)
48
144
230
312
408
120
168
216
Not available
Not available
and the set value.
within 6 seconds, then press
.
within 6
on the
11