American Standard Clean 721AA Instrucciones De Instalación Cuidado Y Mantenimiento página 2

3
6
Apply weight evenly. Do not move after
placement. Water tight seal may break.
9
Thread, then
hand tighten
water supply.
4
Press firmly.
7
Hand Tighten Only.
!
Do Not Overtighten.
10
Tighten handles alternately
until tank contacts bowl.
HAND TIGHTEN ONLY!
- 2 -
5
TIP: Place 2 pieces of masking
tape on floor (as shown) to help
with alignment in step 6.
8
*
For seat installation,
see instructions
included with seat.
!
WARNING:
Overtightening of water supply
line nuts could result in breakage
and potential flooding. If the
connection leaks after hand
tightening, replace the supply line.
Do not use any type of sealant on
the water supply connection.
Use of plumber's putty,
!
pipe dope, or any other
type of sealant will void the warranty.
7 3 0 2 0 6 8 - 10 0