Lincar Perla 514S Manual Del Usuario - Mantenimiento página 47

Equipos a combustible solido: pellets de madera
Idiomas disponibles

Idiomas disponibles

3 MAINTENANCE AND CLEANING
RESERVED TO USER
Cleaning to be carried out by the User
3.1
The frequency of the stove cleaning and maintenance is depending from pellet quality an
quantity. An high degree of humidity, ash, powder or chemicals adds inside the pellet
could increase the necessary cleaning and maintenance operations; so we recommend
again to employ a very high pellet quality
Burner Tank Cleaning : To obtain the best performance during stove's functioning,
EVERY DAY it's necessary to clean the burner tank. Remove the tank and empty it
from every residuals, clean all the holes on the bottom and replace it into the stove being
careful to the position of starting glow plug.
Ash Drawer cleaning
The ash drawer is placed under the foyer, open
the fire door to enter it.
Remove the ash drawer.
The ash drawer has to be emptied every day from
combustion residuals employing the glove. This
operation has to be done with cold stove.
Attention please to embers or hot pieces.
Insert again the ash drawer into its place and
close the fire door.
To forget to insert the ash drawer in its place it's
dangerous.
Ordinary Cleaning about combustion
room.. The combustion room has to be
checked to insure that air feed is regular.
The combustion room can be cleaned with a
vacuum cleaner. To scrape off the scale
from burner basket.
After having remove the burner basket to
scrape off the scale, replace it verifying that
the hole of big dimension has to be
correspondence with glow up tube.
Check that the protection pellet sheet should
be placed on to the burners..
Burner basket
Protection pellet sheet
Spark tube
47/104
IT-GB-FR-ES mod. 514S-514N
Fire Door
Ash Drawer
loading

Este manual también es adecuado para:

Ginger 514n