Idiomas disponibles
Idiomas disponibles
5
After checking fit and alignment, turn sink upside
down and apply a generous portion of silicone
adhesive around the under side of the rim near
the edge. Place sink in position. Wipe off
excess adhesive.
6
Connect supply line to faucet (finger tight) and carefully
bend tubes to engage with the supply shut-off valves.
Tighten connections at faucet and shut-off valves for
secure seal.
7
Connect trap to drain assembly hand tight to check
alignment. It may be necessary to cut off part of the
tailpiece (area "B") or part of the horizontal leg of the
trap (area "C"). Secure joints for watertight assembly.
770279-100 Rev. 2 (7/23)
Shut-Off
Valves
C
B
