•
Place dowel drilling template (F 80-LR or F 160-LR) on the work piece.
•
Connect milling cutter adapter LO-FA with the machine.
•
Position the machine so that it rests on the guide rail at the side of the splinter guard.
•
Pull the compass pin (a) on the router adapter LO-FA upwards.
•
Move the machine with the router adapter LO-FA on the guide rail, releasing the compass pin at the same
time.
•
The compass pin automatically engages in the row of holes on the guide rail (b).
•
The hole can be drilled.
•
Repeat the procedure.
The compass pin (a) can be put in parking position. To do so, pull the compass pin
upwards, turn it parallel to the base body of the router adapter LO-FA and release it again.
4
Use of the dowel drilling template fence (Fig. 3)
•
Slide the dowel drilling template fence into the guide rail.
•
Turn the compass pin (a) to unlock.
•
The compass pin automatically engages in the row of holes on the guide rail. The distance between the
edge of the workpiece/first drilled hole is 9.5 mm (centred for a 19 mm-side).
1
Explication des pictogrammes
2
Données caractéristiques
pour F 80-LR n° d'article 207600 et F 160-LR n° d'article 207601
2.1 Identification du constructeur
MAFELL AG, Beffendorfer Strasse 4, D-78727 Oberndorf / Neckar, Téléphone +49 (0)7423/812-0, Fax +49
(0)7423/812- 218, e-mail [email protected]
2.2 Équipement standard
Rail à trous complet avec :
1 rail à trous F 80-LR ou F 160-LR
1 clé Allen de 2,5 mm
1 guide rapide
Ce symbole signale la présence de suggestions pour l'utilisation et autres
informations utiles.
-5-
Français
