Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4 (continued)
NOTICE
·
Protect surfaces from tool contact.
Failure to do so could result in
surface marring or product damage.
1
st
Position Latch Housing Retainer to side jamb, butting up tight to Head Track Retainer. Drill 1/8" holes -
only through the first wall, clear debris, apply sealant in holes, and fasten with #8 x 3/8" Self-Drilling Screws.
5
Select Mounting Bracket and fastener color (black or stainless steel).
Slide the Mounting Brackets into the top and bottom of the Screen
Housing, with spring tab towards exterior.
9 2 0 5707
2
nd
Position
NOTICE
Latch
Housing
·
Only drill through
Retainer.
first wall of component
part, typically about
1/8". Failure to do so
could result in product
or property damage.
1/8" holes
Drill 1/8" holes,
ONLY through the
first wall using Latch
Housing Retainer as
a guide.
Screen
Housing
15
E-Series
E-Series
#8 x 3/8"
Self-Drilling
Screw
3
rd
200/400 Series
A-Series
A-Series
E-Series
E-Series
Slide
Mounting
Brackets 2"
past top and
Spring
bottom ends
Tab
of Screen
Housing.
Apply
Sealant in
holes and
fasten
Latch
Housing
Retainer
with
#8 x 3/4"
Self-
Drilling
Screws.
Tabla de contenido
