OPERATING INSTRUCTIONS
7.5.3
Dehumidifying Mode (DRY)
In dehumidifying mode (DRY), the Air to Air heat pump unit
operates by reducing the humidity from the atmosphere.
3
2
EN
Fig. 7.8
Dehumidifying mode selection.
Legend
1
- / + buttons
2
MODE button
3
DRY mode indicator
- 14 -
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
Fig. 7.9
Operation modes.
• Select the dehumidifying mode (DRY).
• Press the - / + buttons to select the temperature setting.
When pressing the - / + buttons, the temperature configuration
will increase or decrease by 1ºC.
When the fan is set to DRY mode, the air conditioner selects
1
the low fan speed to make the most effective mode.
NOTE:
i
In dehumidifying mode, prolonged use of the unit under
conditions of considerable air humidity can cause drops
of water to fall on the outlet louvres.
SDH18-MNW-U_EN - 06/13 - Saunier Duval