Nilfisk ACTION A 100 Instrucciones De Uso página 9

Change of dust bag and fi lters
The size and quality of the dust bag
and fi lters affect the machine effi cien-
cy. Use of non original dust bags or
non original fi lters can cause restricted
air fl ow which may lead to machine
overload. Using non-original dust bag
or fi lters will void the warranty.
Changing the dust bag
3
The dust bag indicator shows
completely red when to change
the dust bag.
Always use original dust bags.
1. Open the lid by pushing the button.
2. Seal the dust bag by pulling the
cardboard fl ap.
3. Remove the dust bag.
4. Insert the new dust bag by guiding
the cardboard into the tracks and
push it down.
5. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
6. Close the lid.
7. Insert the hose connection into the
suction inlet.
4 Changing the prefi lter
The prefi lter protects the motor by
absorbing micro-particles that the dust
bag can not keep. Change the prefi lter
with every fourth dust bag. The pre-
fi lter is located behind the dust bag.
Always use original fi lters.
1. Release the hose connection from
the suction inlet.
2. Open the lid by pushing the button.
3. Seal the dust bag by pulling the
cardboard fl ap.
4. Remove the dust bag.
5. Take out the fi lter holder with
prefi lter.
6. Open the fi lter holder.
7. Take out the prefi lter.
8. Fit the new prefi lter. Check that
the prefi lter is correctly fi tted in
the holder.
9. Put the fi lter holder into the track
and push in place.
10. Insert the new dust bag by guiding
the cardboard into the track and
push it down.
11. Unfold the new dust bag carefully.
Check that the dust bag is correctly
fi tted.
12. Close the lid.
13. Insert the hose connection into the
suction inlet.
E
n
g
l
i
s
h
9