Idiomas disponibles
Idiomas disponibles
Your
Impact Wrench incorporates
a Power Management System that
allows you to select four power
output settings. These settings
range from minimum power output
through maximum power output in
the forward direction only. The Air
Wrench will always operate at
maximum power output in the re-
verse direction, no matter what
power output level is selected.
AWARNING:
The four power setting indicators
of increasing size on the rear of
the housing are for reference only
and DO NOT denote a specific
power output. The smallest power
setting indicator designates mini-
mum power output, the two middle
power setting indicators denote
medium power outputs and the
largest power setting indicator de-
notes maximum power output.
The power output can be further
reduced in forward or reverse by
using the variable throttle. Air sup-
ply systems which do not deliver
adequate air pressure can affect
power output at all settings.
SPECIFICATIONS
Model
Type of
Drive
Impacts
Handle
per min.
19905
pistol
1/2'"
1,250
grip
LUBRICATION
Recomm'ended
Torque Range
Forward
ft.lb
50-400
(450 max.)
Forward
Newton
meter (Nm)
68-542
(610 max.)
Reverse
ft-lb
55O
(600 max.)
Reverse
Newton
meter (Nm)
746
(813 max,)
Use Craftsman No. 18830
Pneumatic Tool Care Kit or a good
quality SAE 20 or 20W motor oil.
Craftsman 18830 Oil
Craftsman 18830 Grease
for routine external lubrica-
tion of the impact mecha-
nism through the Hammer
Case Grease Fitting.
Always use an air line lubricator
with these tools.
CAUTION:
Do not mark any
nonmetallic surface on this tool
with customer identification codes.
Such actions could affect tool per-
formance.
7
