Idiomas disponibles
Idiomas disponibles
VERY IMPORTANT! The closure of this access MUST BE
watertight to ensure the draught of the cooker, and all
the chimney connections MUST BE appropriately sealed.
ENSURE a correct levelling of the kitchen installation
base.
The chimney register will allow the cleaning of ash accu-
mulation in this section.
6 – Once you have installed the cooker base, position it
using the frame as an installation guide
FIG. 31—EXAMPLE OF A SMOKE OUTLET ORIENTATION
3.6 CHANGE OF ORIENTATION OF SMOKE OUTLET
DEVA 100 ISLA
The DEVA 100 ISLA cooker has two chimney outlet op-
tions:
Outlet at the bottom: Factory configuration.
Outlet at the rear: To configure this option, change the
Chimney
register
FIG. 30
Chimney
register
assembly by following these steps:
1 - Dismantle the stove collar from the bottom outlet by
loosening the four screws that hold it to the structure
2 – Remove the rear outlet cover by loosening the four
screws that hold it to the structure.
(IMPORTANT. Before loosening the last screw, hold the
inner chimney protector).
3 – Fasten the collar to the back of the cooker .
4 – Fasten the cover to the bottom outlet .
21
FIG. 32
FIG. 33
FIG. 34
FIG. 35
.
