MZ electronic CC011 Instrucciones De Uso página 26

Starting up
The meter counter is equipped with a 1.54'' color TFT display with 240x240 pixel resolution
and two buttons C and R (CALIBRATION and RESET).
A three-second press on button C allows you to enter the parameter setting menu while a
three-second press on button R allows you to reset the chain length measurement to zero.
When switched on, the following page will appear for a few seconds:
Once the initialization procedure is completed, the main screen is displayed with the chain
length indicated
When the instrument is turned on for the first time, it will set up as programmed in the factory
(see table).
CC011
Parameter
Units of measurement
Chain Measure
Barbotin Circumference
Language
Default value
Metres/centimetres
0.0 metres
33 cm
Italian
26
English
Rev. 01 – 2024