Kenmore ELITE 625.382080 Manual Del Propietário página 21

CLEANING THE DRAIN FLOW CONTROL
This procedure is not required if the Central Water
Whole Home Filtration System is operating normally. It
should be performed only if a problem with lack of
water flow to drain is encountered,
as detailed in the
troubleshooting table on Page 19.
1. Remove the clip holding the drain fitting into the
valve (See Figure 22).
2. Remove the drain fitting from the valve
3. Clear any obstruction.
4. Reinstall the drain fitting into the valve.
5. Reinstall the clip to secure the drain fitting in the
valve.
REMOVING DRAIN FITTING TO CLEAN
FLOW CONTROL
Drain
Hose
Clip
c,"a°S: \ ]
\ H
0(_ u---
!
Drain
Fitting
Flow
Control
J
Figure 22
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
21