Idiomas disponibles
Idiomas disponibles
Display
UP
button
DOWN
button
CLEAN
button
ENTER
button
Figure 11
When the transformer is initially plugged into the electri-
cal outlet, the model code (dF 1) and a test number
(example: J1.4), are briefly shown in the faceplate dis-
play. Then the words "SET TIME" appear and 12:00 PM
begins to flash.
NOTE: If "- - - -" shows in the display, press the /X UP
or V DOWN button until "dF 1" shows in the
display. Then, press the ENTER button to set,
and change to the "SET TIME" display.
SET CURRENT
TIME
If the words "SET TIME" do not show in the display,
press the ENTER button a few times until they do.
1. Press the /X UP or V DOWN buttons to set the
present time. Up moves the display ahead; down
sets the time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down for
fast advance.
2. When the correct time is displayed, press the ENTER
button a few times, until the time appears in the dis-
play, but is not flashing.
CODE
TIME
FI.D
SET
TIME
I
•
l_llC
Figure 12
Figure 13
Questions?
Call The Kenmore
Water Line 1-800-426-9345
or visit KenmoreWater.com
12
