Idiomas disponibles
Idiomas disponibles
Wash all accessories in lukewarm water with normal dish soap. Rinse properly and wait
until completely dry before proceeding further.
Connect the electrical plug to a wall socket with a regular upstream earth leakage
circuit breaker.
Ensure that the cord does not come into contact with hot parts and that it is not
subjected to excessive bending or kinking.
Set the cooking temperature to maximum (200° C) using the buttons B, then set the
cooking time to 3 minutes using the buttons F. Do not insert food and start cooking using
the button H. This process helps the spontaneous removal of protective substances from
the internal parts and allows you to check for any factory defects. A slight smoke or
odour may occur as a result during this operation: this is neither critical nor evidence of
malfunctioning and will resolve itself spontaneously.
At the end of the program, open the door, check the general conditions of the
appliance and wait for it to cool down. You can now carry out the normal cooking
operations.
6.
USING THE APPLIANCE
Arrange the food to be cooked inside the suitable cooking accessory, referring to the
table above, then open the door and introduce the filled accessory into the cooking
chamber. After checking that it has been inserted correctly, that there is no dripping or
overflowing and that there are no obstacles to rotisserie or the rotating basket rotation,
proceed with programming the appliance, using a pre-set program or a free program.
PRE-SET PROGRAMS
After doing the above, touch the corresponding icon to start one of the pre-set
programs: the icon will flash and the display will alternately show the specific
temperature and cooking time information. At this time, if you wish to customise the
pre-set program, only for the current recipe, you can change the pre-set programs in
temperature (by tapping the B icons) and in duration (by tapping the F icons). To start
cooking, tap the H icon.
You can select a pre-set program from the following:
27
