Idiomas disponibles
Idiomas disponibles
06.8.1 LED status indicators
LED
LED
LED status
flashes red
(02)
Camera
front
flashes slowly green
lights constantly green
(17a)
lights constantly red
flashes slowly yellow
flashes slowly green
lights constantly green
lights constantly yellow
flashes slowly yellow
(17b)
lights constantly red
flashes slowly yellow
flashes red and green alternately
flashes slowly green
lights constantly green
lights constantly yellow
lights constantly red
(17c)
flashes quickly red
lights constantly green
lights constantly yellow
lights constantly red
flashes quickly green
(17d)
flashes quickly red for 5 sec., then returns
to original status
flashes slowly yellow
flashes slowly green
lights constantly green
lights constantly yellow
(17e)
lights constantly red
31
Meaning
Camera is in setup mode.
PIR sensor is not active.
Camera status is being checked.
Camera is ready for use.
Camera is not ready for use.
Debug mode active.
Connection establishment to the mobile
network.
Connection to the mobile network esta-
blished.
The signal strength is mediocre.
The signal strength is weak.
Connection to the mobile network failed.
No SIM card inserted.
Critical error!
Camera connected to power supply.
Battery capacity more than 60%.
Battery capacity between 30-60%.
Battery capacity below 30%.
Battery capacity insufficient for opera-
tion.
SD card inserted and ready for operation.
SD card inserted - card is full!
No SD card inserted or SD card locked or
formatted incorrectly.
Data is being written to SD card.
Data cannot be written to SD card.
Memory card is being formatted.
Network service is being initialized.
Network quality is at least 4G.
Network quality is 2G to 3G.
No network service.
Troubleshooting
Wait until the camera automatically switches
to working mode. Alternatively, press and hold
the TEST button (13) for 5 seconds. If the ca-
mera is in working mode, the LED goes out.
Check which other LED is red or flashing.
Please contact DÖRR Service.
Make sure that:
the SIM card has credit.
•
the SIM card is inserted correctly.
•
the camera supports the network provider
•
used (see chapter 6.4).
Insert a SIM card.
Please contact DÖRR Service.
Insert fresh batteries as soon as possible.
Insert fresh batteries.
Delete files from the memory card and refor-
mat the card (see chapter 6.3.2)
Please refer to chapter 6.3.
Please check the other SD card status.
Make sure that:
the SIM card has credit.
•
the camera supports the network provider
•
used (see chapter 6.4).
doerr-outdoor.de
