Idiomas disponibles
Idiomas disponibles
ENGLISH
2. Insert the armrest pad bracket (9) into the leg extension bracket (7) and secure the
assembly using the lock knob (41). Fig. 8
Step 8
1.
Attach the backrest (58) to the upright frame (5) and fix it using M8x45 hex screws (80)
and washers.
2. Attach the seat cushion (57) to the seat bracket (6) and fix it using M8x45 hex screws (80)
and washers.
3. Attach the armrest pad (60) to its bracket (9) and secure it using M8x20 hex screws (63)
and washers. Fig. 9
Step 9
1.
Attach the right and left handles (52, 53) to the upright frame of the abdominal bench (59)
and secure the assembly using M10x50 hex bolts (74), washers and nuts.
2. Insert the handlebar arm (16) into the left and right handles and fix them using M10x20
hexagonal bolts (78), washers and nuts.
3. Attach the abs bench frame (64) to the corresponding upright frame (59) and secure the
assembly using the lock pin (85). Fig. 10
Step 10
1.
Attach the left and right push-up handles (55, 56) to the rear lower base (2) and secure the
assembly using M10x90 hex bolts (71), washers and nuts. Fig. 11
Step 11
1.
Pass the cable 3 (44) through the pulleys in the order a, b, c, d, e, respecting the position of
the cable (above or below the pulleys).
2. Pass the cable 1 (34) through the pulleys in the order f, I, j, k, l, respecting the position of the
cable (above or below the pulleys).
3. Pass the cable 2 (39) through the pulleys in the order m, n, o, p, q, r, respecting the position
of the cable (above or below the pulleys). Connect the end of the cable using two safety
hooks (38) and a chain (40). Fig. 12 and Fig. 13
Step 12
1.
Place one end of the grid (23) on the corresponding bracket (17). Fig. 14
2. Place the other end of the grid (23) on the corresponding bracket (17). Fig. 15
44
DRUMFIT HOMEGYM 2000 DOUBLE
