cecotec DRUMFIT HOMEGYM 2000 DOUBLE Manual De Instrucciones página 42

ENGLISH
86 Handle
87 Dumbbells
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- Drumfit HomeGym 2000 Double weight training station
- Instruction manual
- Tool kit
3. PRODUCT ASSEMBLY
Step 1
1. Place the foot covers (88) on the ends of the rear (2) and front (3) lower base.
2. Insert the weight guides (22) into the holes in the rear lower base (2) and attach the main
lower frame (1) using two M10x20 hex screws (78), two M8x20 (81) and washers to secure
the assembly.
3. Attach the front lower base (3) to the main lower frame (1) and secure the assembly using
two M10x45 hex bolts (75), washers, nuts and two M8x20 hex bolts (81).
4. Secure the grid attachment part (17) to the rear lower base (2) using 4 fixing screws and
washers (82). Fig. 3
Step 2
1. Slide the weight stack (24, 29) along the guides (22).
2. Place the weight stack bushing (25) in the first hole of the weight selector pin (21) and
secure it with the pin
42
DRUMFIT HOMEGYM 2000 DOUBLE
1
2
∅
10 (26).
88 Foot cover
89 M8 x 40
6
1