Melchioni Family Vittoria Manual De Instrucciones página 36

reached. Press the START button to alert the defrosting process, press the STOP button
to return to program selection.
During defrosting process, the display alternately shows the temperature value (fixed
at 70° C) and the residual treatment time, starting from what was previously selected
and decreasing the display as time goes by: the icons and flash, giving an
indication of the process in progress. It is possible to interrupt defrosting process by
pressing the STOP button at any time, if the button panel is not locked, as shown by
the icon and described in the following chapters; in this case, proceed to unlock the
button to stop cooking with the STOP button.
DELAYED START
It is possible to program the appliance so that any of the previous programs is started
automatically after a period of time which can be selected between 10 minutes and
24 hours, at intervals of 10 minutes. Insert the food in the appropriate accessory and
place it inside the appliance and close the door. The appliance will start automatically
once the delay is over.
To set the delayed start, before choosing the program to start, select the icon and
press START to confirm: the display shows the delay time with the flashing indication
"00:10", corresponding to 10 minutes; press the UP and DOWN buttons to increase or
decrease the delay, confirm the selection with the START button. If, during the
program, it is necessary to use the rotisserie, activate it as described in the following
chapter; it will only start at the end of the programmed delay, but the icon is
displayed immediately. Press the STOP button to return to program selection.
Once you have confirmed the desired delay time, you can select the program to start
after the set time has elapsed, as described above for an instant start program. Once
the settings are complete, the display shows the remaining delay time, gradually
decreasing, while the icon flashes to indicate that a delayed start is in progress.
During this period it is possible to stop the program and put the appliance in stand-by
by pressing the STOP button.
It is not possible to cancel the delay and start the program before the time runs out: it
is necessary to press STOP and start a normal program from the stand-by mode.
ROTISSERIE USE
The rotisserie can be used to cook food on a spit or inside the rotating cylinder: refer
to the following chapter USING THE ACCESSORIES to assemble and use these
35