EN
Step 6
Slide the left pedal tube (9L) to the left bottom handlebar tube (11L) and fasten
it with one set of connecting shaft (23), flat washer (22) and nylon nut (21).
Attach decorative cover (24/25) to the tube firstly and screw with 1pc self-
tapping screw (41), which is pre-assembled on the decorative cover. Then
attach decorative cover (26L/R) to the tube and screw with 2pcs cross-head
screws (27), which are pre-assembled on frame and 1pc self-tapping screw
(28), which is pre-assembled on decorative cover.
Attach the rear side of left pedal tube (9L) to the crank of main frame (1) and
secure it with one set of bolt (31L), wave washer (75), flat washer (76), washer
(32) and nut (33L).
Repeat for right pedal tube (9R).
Note: The bolt (31L/R) and nut (33L/R) are marked "L" and "R" - Left and Right.
The right bolt (31R) & nut (33R) should be threaded on clockwise to screw and
the left bolt (31L) & nut (33L) anticlockwise.
M12*63 2X
M16*108 1X
M16*108
1X
26R 27
23
9R
41
24
22
11L
25
21
76
31R
28
21
75
41
26L
22
1
27
32
24
33R
26R 28
27
25
23
26L
27
9L
33L
32
75
76
31L
52