Idiomas disponibles
Idiomas disponibles
7. TEMPERATURE INFORMATION
7.1 °C/°F Temperature Display
The temperature is displayed either in °C/°F. The temperature unit can be set by
●
following the manual time settings on page 7.
●
If the temperature reading is below the minimum range then LL.L will be displayed. If it
is above the maximum reading then HH.H is displayed.
7.2 Temperature Trend Display
After you insert the batteries, the weather station measures the current temperature. The
trend display shows a neutral temperature course
display is determined as follows:
●
If, after an hour, the temperature is more than 1°C higher than the value measured first,
then a positive course is displayed
●
If, after an hour, the temperature is more than 1°C lower than the value measured first,
then a negative course is displayed
●
If the temperature does not change within an hour, then the upward or downward
pointing arrow becomes a horizontal arrow. The measured temperature is then taken as
the neutral value from which further prognoses are made.
7.3 Outdoor Temperature Alert Settings
Press and hold down the ALERT button for 2 seconds until the icon for Temperature
●
Alert starts to flash.
The icon of Upper limit of the alarm will flash. Use the + and - buttons to set the required
●
maximum temperature. Press the ALERT button to confirm the settings.
The icon of Lower limit of the alarm will flash. Use the + and - buttons to set the required
●
maximum temperature. Press the ALERT button to confirm the settings and to end the
settings procedure.
7.3 Activating and Deactivating Temp/Frost Alerts
Briefly press the ALERT button to activate or deactivate the Temperate Alert and Frost
●
Alert.
●
If the frost alert is activated snowflake icon will appear in the Outdoor Temperature area.
The alarm will sound at -1°C to +3°C or at +30°F to +37°F.
●
If the temperature alert is activated the Temp Alert symbol appears in the Outdoor
Temperature area. The alarm will sound at the set values.
●
Both the temperature and frost alerts can be active at the same time and both icons will
show on the weather station.
7.4 Maximum/Minimum Temperature
●
The Weather Station will automatically show the daily Max and Min Temperatures once it
starts receiving readings. These will reset at 0.00 automatically.
. The further course of the trend
.
.
9
