Idiomas disponibles
Idiomas disponibles
c) If no keys are pressed after 5 seconds other than the
and
keys, the LED display will show the room temperature. When the
temperature is <10 ºC, it will display "LO"; when the temperature is >40 ºC,
it will display "HI".
d) The device will not change the temperature within 10 s after being
switched on. After the device has been working for 10 s, if the room
temperature is higher than the set temperature, the PTC heating will
turn off, the low/high heating power light will be off and the fan will
be off after 10 seconds. If selected, the swing feature will stop. Other
features will remain unchanged. If the room temperature decreases to
less than 2 ºC in relation to the set temperature, the heating function
will start running again, as well as the fan & the swing features (if
previously selected). Other features will also be on.
e) When setting the time and temperature at the same time, the
display will alternate between showing the time and the room
temperature, at 30 second intervals. When the timing is not set, it will
only display the set temperature.
8. Continuous electric memory function: This function allows to keep
the last setting (except timer setting) if the heater is restarted. When
the equipment is working and if you press the
key, it will enter in
standby mode and keep the last configuration it had before. After
pressing the
key it will resume according to the saved configuration.
For example, under the high power heating condition before the device
shuts down, it will first work for 10 seconds in low power, then convert
to high power with
LED on when pressing the
key again under
standby mode.
Note: this function will just work if the black power switch at the back
housing keeps on and power cord keeps plugged in.
9. When the appliance has been working continuously for 1 minute, the
display's brightness will be reduced to 1/3 of its normal brightness. At
night time, the LED display light will be soft. The LED display's light
brightness will be restored after operation.
10. over-heating protection function
when the temperature is over 55 ºC, the appliance will switch off
12
AF_BECKEN_MANUAL_climatizador QuenteFrio_BHC3864_A5 (2).indd 12
05/07/2019 15:05
