7. TROUBLESHOOTING
In the event that the appliance exhibits abnormal operating conditions other than that stated in Chapter 2 above, it is
advisable to consult the following table for simple troubleshooting.
Problem
The fan does not start.
Fan is particularly noisy.
If the product shows malfunctions or anomalies other than those indicated, it is highly probable that the problem cannot be
solved independently. In this case, consult qualified technical personnel.
8. TECHNICAL DATA
Power supply voltage :
Motor power :
Dimensions :
Tilt range :
Cable length :
9. CONFORMITY OF THE PRODUCT
The producer Melchioni Spa declares that the product Industrial floor fan Mod. MF 2445IND (cod. [118620062) is in
compliance with Directive 2014/30/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility.
The producer Melchioni Spa declares that the product Industrial floor fan Mod. MF 2445IND (cod. [118620062) is in
compliance with Directive 2014/35/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment
designed for use within certain voltage limits.
The producer Melchioni Spa declares that the product Industrial floor fan Mod. MF 2445IND (cod. [118620062) is in
compliance with Directive 2009/125/EC of the European Parliament and of the Council, of 21 october 2009, establishing a
framework for the setting of ecodesign requirements for energy-related products.
The producer Melchioni Spa declares that the product Industrial floor fan Mod. MF 2445IND (cod. [118620062) is in
compliance with Directive 2011/65/EU of the European Parliament and of the Council, of 8 june 2011 and subsequent
Commission Delegated Directive 2015/863, on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
According to Directive 2012/19/EU of the European Parliament and of the Council, of 4 july 2012, on waste electrical and
electronic equipment (WEEE), the presence of the crossed-out bin symbol indicates that this appliance is not to be
considered as urban waste: its disposal must therefore be carried out by separate
collection. Disposal in a non-separate manner may constitute a potential harm to the environment and
health. This product can be returned to the distributor when purchasing a new device. Improper
disposal of the appliance constitutes misconduct and is subject to sanctions by the Public Security
Authority. For further information, contact the local administration responsible for environmental
matters.
Possible cause
The electrical plug is disconnected
from the mains.
The electrical socket to which the fan
is connected does not supply
electricity.
Parts are not fully assembled.
230 VAC 50 Hz (+ - 10%)
80 Watts
50.7x54.3x18.7cm
Approx. 120°
154 cm
9
Probable solution
Plug the electrical plug into a normal
10 A household socket.
Check the efficiency of the socket by
connecting another appliance that is
definitely working. If necessary,
contact an electrician.
Review the assembly process,
tightening screws and bolts more fully.