PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
• DO NOT attempt to operate this oven with
the door open, since open-door operation
can result in harmful exposure to microwave
energy. It is important not to defeat or
tamper with the safety interlocks.
• DO NOT operate the oven if it is damaged.
It is particularly important that the oven door
close properly and that there is no damage
to the:
1. door (bent)
2. hinges and latches (broken or loosened)
3. door seals and sealing surfaces.
• DO NOT place any object between the oven
front face and the door, or allow soil or
cleaner residue to accumulate on sealing
surfaces.
• THE OVEN should not be adjusted or
repaired by anyone except properly qualified
service personnel.
GROUNDING
INSTRUCTIONS
This appliance
must be grounded!
If an electrical
short
circuit occurs,
grounding
reduces
the risk of
electric
shock
by providing
an escape
wire for the
electric
current.
This appliance
is equipped
with a
cord
having
a grounding
wire with a grounding
plug.
Put the plug into an outlet
that is properly
installed
and grounded.
/K WARNING
If you
use the grounding
plug
improperly,
you
risk electric
shock.
Ask a qualified
electrician
or the Sears
Service
Department
if you do not understand
the grounding
instructions
or if you wonder
whether
the appliance
is
properly
grounded.
This appliance
has a short
power
supply
cord to
reduce
the risk of anyone's
tripping
over or becoming
entangled
in the cord. You may use an extension
cord
if you are careful.
If you
use an extension
cord,
be sure that:
• The extension
cord has the same
electrical
rating as
the appliance.
• The marked
rating of the extension
cord shall be
equal to or greater
than the electrical
rating
of
the appliance.
• The extension
cord is a grounding-type
3-wire
cord.
• The extension
cord does not drape over a
countertop
or tabletop,
where
it can be pulled
on
by children
or tripped
over
accidentally.
• The electrical
cord is dry and not pinched
or
crushed
in any way.
NOTE: This oven draws 13.8 amperes at 120 Volts, 60 Hz.