Idiomas disponibles
Idiomas disponibles
SELF-CLEANING
(HOT WATER TUBE)
1. To clean, fill the water
reservoir
to capacity
with a mixture
of 1/3 white
vinegar
and
2/3 water
2. Press the "BREW"
button.
One cycle should
be sufficient
to adequately
clean the coffee
maker.
3. Run at least two cycles
of fresh
cold water
through
the unit before
using the unit
again to brew coffee.
IMPORTANT
1. Always
use cold water to make
coffee.
Warm
water
or other liquids
could cause
damage
to the coffee
maker.
2. Before
using the first time, or when
the coffee
maker
has not been used for some
time,
fill the water
reservoir
to the maximum
with cold water
and without
coffee
grounds
and without
a paper filter.
Turn
on and allow the water
to flow through,
then discard
and fill with clean water.
3. Never pull out the water
reservoir
during
the brewing
cycle.
Extremely
hot water
or steam
can cause
injury.
Always
wait 5 minutes
after coffee
is brewed,
before
pulling
out the water
reservoir.
4. Do not detach
the filter basket
from the water
reservoir
when
it is filled with water.
5. When
you remove
the water
reservoir,
lift it slightly.
23
