Idiomas disponibles
Idiomas disponibles
All operating elements de scribed can be found
on the fold-out page 3.
1 Operating Elements
1 LC display to indicate the group (
channel and the battery status in 4 levels
Display backlight:
green = normal mode, muting off
red
= muting on
blue = automatic frequency matching
(REMOSET transmission)
2 Button
/
to switch on or off and to mute the
microphone
switching on: press the button briefly
muting on / off: press the button briefly
switching off: keep the button pressed for a while
3 Button
to make settings in the different setting
modes (to search in descending order, to select
a lower value and to deactivate functions)
4 Button SET
to activate the setting modes one after another
group (keep button pressed for a while)
→ channel → sensitivity → transmission
power → automatic frequency matching
→ identification number → lock function
and to confirm the settings
Note: When the lock function has been activated (indi-
cation
when you press a button), you will only be
able to activate the setting mode for the lock function
(
chapter 5.1.6).
5 Button
to make settings in the different setting
modes (to search in ascending order, to select a
higher value and to activate functions)
6 Screw sleeve for the battery compartment (8)
7 Cover of the battery compartment (8)
To open the cover, slide it downwards so that it
will unlock.
8 Battery compartment (with batteries inserted)
2 Important Notes
This unit corresponds to all relevant directives of
the EU and is therefore marked with
G
The unit is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humidity and heat (admissible ambient tempera-
ture range: 0 – 40 °C).
G
For cleaning only use a dry, soft cloth; never use
water or chemicals.
8
G
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is not
correctly operated, or if it is not repaired in an
expert way.
, the
...
)
3 Applications
The UHF PLL hand-held transmitter IN-264TH / 2
with dynamic microphone cartridge is designed for
transmission in the frequency range 740 – 776 MHz.
It is suitable for operation with the following re -
ceivers from JTS:
– IN-164R/2 with one receiver unit
– IN-264R/2 with two receiver units
The transmitter and the receiver create a wireless
audio transmission system. The transmission
channel is selected from 6 channel groups of dif-
ferent size; the largest group contains 22 preset
channels. The transmission range depends on
local conditions; in free field it may reach a maxi-
mum of 300 m. The REMOSET function of the sys-
tem will automatically match the frequency be -
tween the transmitter and the receiver unit.
3.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL declare
that the unit IN-264TH/2 is in accordance with
the basic requirements and the other relevant reg-
ulations of the directive 1999 / 5 / EC. The decla -
ration of conformity is available on the Internet
(www.jts-germany.de or www.monacor.com).
This unit may be operated in the following coun-
tries:
DE
In the Federal Republic of Germany, the transmitter
IN-264TH/2 requires a frequency assignment (for
.
which a charge is payable).
In other countries, it is necessary to apply for a cor-
responding approval. Prior to operating the system
outside Germany, please contact the MONACOR
subsidiary or the corresponding authorities of the
respective country. Links to the national authorities
can be found via the following Internet address:
If the unit is to be put out of operation
definitively, take it to a local recycling plant
for a disposal which is not harmful to the
environment.
