Idiomas disponibles
Idiomas disponibles
Replacing the Light Assembly
11.
Remove the brass or stainless steel pilot screw from
the top of face ring.
the housing to the face ring and niche. Failure to use
the provided screw could create an electrical hazard
which could result in death or serious injury to pool users,
installers or others due to electrical shock.
12.
Remove the light assembly from the niche and place
it on the deck.
13. Cut the cord about 12-inches (30.5 cm) from the back
of the light assembly.
14. Remove Junction Box cover, disconnect the light
fixture wires, and pull the cord through the conduit.
Only use the provided pilot screw.
This screw mounts electrically ground
INTELLIBRITE
Architectural Series Pool/Spa Light Installation and User's Guide
®
(cont.)
Pilot screw
Face ring TAB
(hidden)
9
