Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL OPERATION
LCD - Liquid Crystal Display
1
4
ROOM
SCREEN WHILE
DEPRESSING ON
KEY
SCREEN WHILE
DEPRESSING OFF
KEY
SET
TEMP
THERMO SET
2
3
SET
TEMP
5
6
TEMP
TEMP
SCREEN AFTER 3
SECOND DEFAULT
TEMP
SCREEN AFTER 3
SECOND DEFAULT
TEMP
ROOM
THERMO MODE
1.
DISPLAY
Indicates CURRENT room temperature .
0
0
2.
F OR
C
Indicates degrees Fahrenheit or Celsius.
3.
FLAME
Indicates burner/valve in operation.
4.
ROOM
Indicates remote is in THERMO operation.
5.
TEMP
Appears during manual operation.
6.
SET
Appears during time the of setting the desired
temperature in the thermo operation.
0
0
SETTING
F /
C SCALE
The factory setting for temperature is
first
Press the ON key and the OFF key on the transmitter at the same
•
time this will change from
0
change from
C back to
MANUAL FUNCTION
To operate the system in the manual "MODE" do the following.
ON OPERATION
Press the ON key the appliance flame will come on. During this time the
LCD screen will show ON, after 3 seconds the LCD screen will default
to display room temperature and the word TEMP will show. (Flame icon
will appear on LCD screen in manual on mode)
OFF OPERATION
Press the OFF key the appliance flame will shut off. During this time the
LCD screen will show OF, after 3 seconds the LCD screen will default to
display room temperature and the word TEMP will show.
THERMOSTAT FUNCTION
SETTING DESIRED ROOM TEMPERATURE
This remote control system can be thermostatically controlled when the
transmitter is in the THERMO mode (The word ROOM must be
displayed on the screen). To set the THERMO MODE and DESIRED
room temperature,
Press the MODE key until the LCD screen shows the word ROOM,
then the remote is in the thermostatic mode.
Press and hold the SET key until the desired set temperature is
reached. (By pressing and holding the set key the LCD screen set
numbers will increase from 45
29
0
F. To change this setting to
0 F
0 C
to
. Follow this same procedure to
0
F.
0
0
to 99
then restart over at 45
0
C,
0
) Next
