HOLZMANN MASCHINEN MTY 8-70 Manual De Instrucciones página 29

14.3 Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Make sure that
unauthorised persons and especially children do not have access to the machine.
Improper storage can damage and destroy important components. Only store packed
or unpacked parts under the intended environmental
14.4 Disposal
Observe the national waste disposal regulations. Never dispose of the machine,
machine components or equipment in residual waste. If necessary, contact your
local authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he
is obliged in certain countries to dispose of your old machine properly.
TROUBLESHOOTING
Danger due to electrical voltage!
Handling the machine with connected power supply may result in serious injury or
death.
 Always disconnect the machine from the power supply before maintenance or
repair work and secure it against unintentional reconnection.
Many possible sources of error can be excluded in advance if the machine is properly connected to
the mains.
If you are unable to carry out necessary repairs properly and/or do not have the required training,
always consult a specialist to solve the problem.
Fault
Machine cannot be switched on
Poor grinding performance
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O TE
WAR N I N G
Possible cause
 Mains plug is not plugged in
 On-Off-switch is defective
 Grinding disc is worn out
TROUBLESHOOTING
conditions!
Remedy
Plug in the mains plug

Contact the Customer Service

Center
Replace grinding disc

Dressing the corundum grinding

wheel
29
MTY 8-70