HOLZMANN MASCHINEN MTY 8-70 Manual De Instrucciones página 28

14.2 Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects
that could affect your safety must be repaired immediately!
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the
•
machine.
• Use only proper and suitable tools.
• Use only original spare parts recommended by the manufacturer.
14.2.1 Maintenance and servicing plan
The type and degree of machine wear depends to a large extent on the operating conditions. The
following intervals apply when using the machine within the specified limits:
Interval
Before every start of work
Each time after
completion of work
As required
14.2.2 Changing the grinding wheel
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
Component
Grinding disc
Power cord
Surfaces
Air vents
Grinding disc
What to do?
check for damage
remove dust and dirt
replace
Remove protection cover grinding disc
Push down the lock by using a screw
•
driver (1)
Remove the protection cover grinding
•
disc (2)
• Lock the shaft with a pin (1)
Loosen the nut with a wrench (2) turning
•
counterclockwise
Remove the grinding disc
•
Insert and remount the new grinding
•
disc
Remount the protection cover grinding
•
disc
Assembling with adapter:
For grinding discs: Ø125 x 10 x Ø32 mm
• Insert the lower part of the adapter (1) on
the shaft
Put on the grinding disc (2)
•
Push on the adapter top (3)
•
Tighten the nut
•
28
MTY 8-70