HOLZMANN MASCHINEN MTY 8-70 Manual De Instrucciones página 23

11.3 Safety devices
The machine is equipped with the following safety devices:
11.4 General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
• Check the machine for completeness and function before starting.
Select a level, vibration-free surface as the installation area.
•
Ensure sufficient space around the machine.
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
• Ensure a clean working environment.
• Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
parts, etc.).
• Only use tools that are in perfect condition and free of cracks and other defects (e.g.
deformations).
Remove tool keys and other setting tools before switching on the machine.
•
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorized restarting.
The machine may only be operated, maintained or repaired by persons who are familiar
•
and who have been informed about the dangers arising from this work.
• Ensure that unauthorized persons keep a safety distance from the machine and keep
children away from the machine.
Always work with care and the necessary caution and never use excessive force.
•
• Do not overload the machine.
Hide long hair under hair protection.
•
Wear close fitting protective work clothing and suitable protective equipment (eye
•
protection, ear protection, safety-shoes, work gloves).
Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
•
Do not work on the machine if you are tired, not concentrated or under the influence of
•
medication, alcohol or drugs!
Do not use the machine in areas where vapours of paints, solvents or flammable liquids
•
represent a potential danger (danger of fire or explosion!).
• Shut down the machine and disconnect it from the power supply, before adjustment,
changeover, cleaning, maintenance or repair work, etc. Before starting work on the
machine, wait until all tools or machine parts have come to a complete standstill and
secure the machine against unintentional restart.
Warning signs and/or stickers on the machine that are illegible or have been removed must
•
be replaced immediately!
11.5 Electrical safety
Make sure that the machine is grounded.
•
Only use suitable extension cables.
•
• A damaged or tangled cable increases the risk of electric shock. Handle the cable with care.
Never use the cable to carry, pull or disconnect the power tool. Keep the cable away from
heat, oil, sharp edges or moving parts.
• Proper plugs and outlets reduce the risk of electric shock.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Protective device protection cover grinding disc (1)
SAFETY
23
MTY 8-70