Idiomas disponibles
Idiomas disponibles
8. Shutdown mode
In standby or heating mode, press and hold the power icon for 3 seconds, a short beep will
sound and the device will switch to off mode. If the surface of the relevant cooking zone
currently has residual heat, the power level indicator display will show and indicate a residual
heat warning.
9. Safety child lock icon
-
The control panel can be locked by pressing and holding the child lock icon for 3 seconds
while the appliance is in standby or heating mode. The safety child lock icon will show up.
When the appliance is switched off, the child lock icon will turn off.
-
During safety child lock, "Lo" will appear on the display and flash (1s/time). If the cooking
zone has set the time, the display will show the time and "Lo" alternately. Otherwise, it will
display "Lo" and "- -".
-
In child lock mode, you can unlock it by pressing and holding the child lock icon for about
3 seconds.
-
In child lock mode, the rest of the icons are unavailable, except for the power and child
lock icons.
10. Timer
The timer can be programmed separately for any cooking zone, and the timing of each cooking
zone is independent of each other.
Timing of a single cooking zone
To set the countdown time for a cooking zone, first press the timer icon. The decimal point on
the display of the selected cooking zone will light up. The decimal point on the timer display
will be shown to indicate that the timer set has been related to the selected cooking zone. At
this point, you can use the
Timing of both cooking zones
-
Each timer setting operation shall be the same as "Timing of a single cooking zone".
-
Press any cooking-zone selection icon, and the timer display will show the timer value for
that cooking zone.
-
When both cooking zones are timed, you can change the timing independently by pressing
the timer icon.
-
If no cooking zone is selected, the display will show the minimum timer value of the cooking
zones and the corresponding cooking zone indicator will show the decimal point.
11. Pre-set time
The cooking zones have a pre-set timer function. The relationship between the pre-set timing
and the power level is shown in the table below:
Power level
Pre-set time (h)
/
icons to adjust the countdown time.
1
2
6 hrs.
6 hrs.
3
4
5 hrs.
5 hrs.
BOLERO SQUAD V 2001
ENGLISH
5
6-9
4 hrs.
1.5 hrs.
53
