Craftsman EZ3 917.388153 Manual Del Usuario página 14

Idiomas disponibles

Idiomas disponibles

CAUTION:
The operator presence control
bar must pivot freely to permit blade brake
engagement when control bar is released.
Do not over tighten the fasteners holding
the controls to the upper handle.
• To change from medium Iowto high
position only the upper handle section
will have to be turned over.
• To change from medium low to low
position, only the lower handle section
will have to be turned over.
ShippingPosition
Lower Handle
Squeeze to
remove
Handle
Bracket
Hairpin Clip
ENGINE
CARBURETOR
Your carburetor has a non-adjustable fixed
main jet for mixture control. If your engine
does not operate properly due to sus-
pected carburetor problems, take your
lawn mower to an authorized service
center for repair or adjustment.
ENGINE SPEED
Your engine speed has been factory set.
Do not attempt to increase engine speed
or it may result in personal injury. If you'
believe that the engine is running too fast
or too slow, take your lawn mower to an
authorized service center for repair and
adjustment.
Immediately prepare your lawn mower for
storage at the end of the season or ifthe unit
will not be used for 30 days or more.
LAWN MOWER
When lawn mower isto be stored for a period
of time, clean it thoroughly,remove all dirt,
grease, leaves, etc. Store in a clean, dry area.
• Clean entire lawn mower (See "CLEANING"
in the Customer Responsibilitiessection of
this manual).
• Lubricate as shown in the Customer
Responsibilitiessection of this manual.
• Be sure that all nuts, bolts, screws, and pins
are securely fastened. Inspect moving
parts for damage, breakage and wear.
Replace if necessary.
• Touch up all rusted or chipped paint
surfaces; sand lightlybefore painting.
HANDLE
You can fold your lawn mower handle for
storage.
• Squeeze the bottom ends of the lower
handle toward each other untilthe lower
handle clears the handle bracket, then
move handle forward.
• Loosen upper handle mounting bolts
14
enough to allow upper handle to be folded
back.
IMPORTANT:
When foldingthe handlefor
storage or transportation,be sure to foldthe
handle as shown oryou may damage the
controlcables.
• When setting up your handle from the
storage position,the lower handle will
automatically lockintothe mowing position.
Lower
Handle
Handle
Squeeze to fold
Operator Presence
ControlBar
Upper Handle "_
Fold Forward
ForStorage
Hairpin
Cotter
oldBackward
MowingPosition
Lower Handle
loading