Thermador Professional PCG30 Manual De Instalación página 10

7-11/16"
Corner Notch Detail
30' Cooktop | 36' Cooktop | 48 Cooktop
29-7/8" 35-7/8" 47-7/8"
3/8" 3/8" 13/16"
0" (Control Panel Projecting 1-1/4" from Base
Cabinet Face)
11/16" (Notch Required for Standard 24" - Deep
Base Cabinet, Control Panel Projecting 9/16" from
Base Cabinet Face) 1-1/4" (Control Panel Flush to
Cabinet Face - Min. 24-9/16" - Deep Base Cabinet
Required)
D 29-1/8" 35-1/8" 46-1/4"
2x 4 Corner
Support
Detail A: (Front Face of Cabinet)
25-3/8" ——»j
OF _ . |
9-114" TO CENTERLINE
GAS INLET
23-5/16" >
—
Cabinet face for installation with projecting control panel
Cabinet face for installation with flush control panel
" Low Back required when there is less than 12"
horizontal clearance from back of cooktop to combustible
material. With more than 12" of clearance, the Island
Trim may be used.
English 8
Figure 5: Side View of Cooktop