Deltaco SH-AC02H Manual Del Usuario página 32

ENG
A N O R D I C B R A N D
Controls
When the device is connected to power, the device will enter standby status and play a confirmation sound.
1. Timer button: The timer can be used to automatically turn on or to turn off the device. Press to turn on the timer,
the LED display flashes to confirm. Use the up and down buttons to select time. The settings are 1 to 24 hours.
Each press adjusts the time by 1 hour.
2. Fan speed button: Press to change fan speed. Settings are: High, medium and low. Changing fan speed is not
available in dehumidifying mode.
3. Up and down buttons: Press to change temperature or timer value. Not available in fan or dehumidifying mode.
4. LED display.
5. Mode button: Press to switch between cooling / heating / fan / dehumidifying mode.
6. On/off button: Press to turn the device on or off.
7. Sleep mode button: On the remote press to turn on sleep mode. On the device press Up + Fan speed button
to turn on sleep mode. Fan speed will decrease to low.
8. Up/down swing button: Press to turn the swinging motion on or off.
9. Celsius/Fahrenheit button: Press to switch between Celsius and Fahrenheit.
Dehumidfier mode
When using this product in dehumidifying mode, use a drainage solution to lead away the accumulating water.
See drainage instructions. The LED status for dehumidifier mode shows as active with the letters "dh" on the
control panel.
Frost protection
In cooling, dehumidifying or sleep mode, the device will automatically enter protection status if the temperature of
the ventilation pipe is too low. If the temperature of the ventilation pipe rises again, it will automatically return to
normal operation.
Overflow protection
When the water exceeds the max level, the device will play a sound, and the control panel will flash the LED with
the word "FULL". You need to empty the water, see the drainage instructions chapter. After the water is emptied,
it will automatically return to normal operation.
Automatic defrosting
This device has automatic defrosting. Defrosting is achieved through four-way valve reversing.
Compressor protection
The compressor has a 3-minute reboot delay that prevents it from starting after it has just been turned off. To
increase the lifespan of the compressor.