Melchioni Family MF 2403T30 Manual De Instrucciones página 11

6. CARE AND MAINTENANCE
The product does not require any maintenance. Use a damp cloth for cleaning. Do not use any aggressive or
abrasive cleaning agents. It is imperative to disconnect the blade from the mains before cleaning. Do not use
compressed air to clean the blade, and in any case never try to help the blade rotate other than normal use of
the appliance. Wait until it is completely dry before reconnecting the appliance to the mains.
7. TROUBLESHOOTING
In the event that the appliance exhibits abnormal operating conditions other than that stated in Chapter 2
above, it is advisable to consult the following table for simple troubleshooting.
Problem
The fan does not start.
Oscillation does not start.
Oscillation does not stop.
Fan is particularly noisy.
If the product shows malfunctions or anomalies other than those indicated, it is highly probable that the
problem cannot be solved independently. In this case, consult qualified technical personnel.
8. TECHNICAL DATA
Power supply voltage:
Power:
Height:
Width:
Depth:
Weight:
Oscillation range:
Cable length:
9. CONFORMITY OF THE PRODUCT
The producer Melchioni Spa declares that the product Table fan Mod. MF 2403T30 (cod. [118620056) is in
compliance with Directive 2014/30/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to electromagnetic compatibility.
The producer Melchioni Spa declares that the product Table fan Mod. MF 2403T30 (cod. [118620056) is in
compliance with Directive 2014/35/EU of the European Parliament and of the Council, of 26 february 2014, on the
harmonisation of the laws of the Member States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits.
Possible cause
The electrical plug is disconnected
from the mains.
The electrical socket to which the
fan is connected does not supply
electricity.
Oscillation control is not fully
pressed.
Oscillation control is not fully
released.
Parts are not fully assembled.
220 – 240 ~ 50Hz
30 W
39.9 cm
34 cm
23.9 cm
1482 g
90°
142 cm
10
Probable solution
Plug the electrical plug into a
normal 10 A household socket.
Check the efficiency of the socket
by connecting another appliance
that is definitely working. If
necessary, contact an electrician.
Fully press down the control (7).
Fully release the control (7).
Review the assembly process,
tightening screws and bolts more
fully.