Idiomas disponibles
Idiomas disponibles
Specifications
Power supply
Power input
Power consumption
Operating cycle
Cutting style
Entry width
Shred capacity
Installing the product
1. Place the product on a stable and flat surface.
2. Connect the power cable to a power outlet.
Using the product
1. Slide the control slider to AUTO.
Standby mode is activated.
2. Insert max. 6 A4-size sheets of paper vertically into the paper entry
at once.
The product detects the paper and starts shredding.
- Do not hold on to the paper when it is being shredded. After
shredding, the product returns to the standby mode automatically.
Forwarding or reversing the product
When paper is jammed in the shredder, you can forward or reverse the
shredder blades to remove the paper.
1. Slide the control slider to FWD or REV.
The product starts to forward or reverse the running.
2. Slide the control slider to AUTO.
3. Insert max. 6 A4-size sheets of paper vertically into the paper
feeder at once.
220-240 VAC 50 Hz
0.9 A
190 W
2 minutes on / 40 min off
Strip cut
220mm
6 sheets of 80 g of paper size A4
5
