Cleaning And Maintenance - Domo DO151A Manual De Instrucciones

DO151A
Warning: Always fill the water tank with water before using the COOL
function. Never use the COOL function without water in the water tank.
FUNCTIONS
STOP-LO-MI-HI
Press the LO button for a low wind speed, the MI button for a medium speed and the
HI button for high speed. Press the STOP button to stop the air flow.
TIMER
Set the timer knob to I to switch on the air cooler (stand-by).
Set the timer knob to 0 to switch off the air cooler.
Turn the timer knob from 0 to 120 to set the timer, with a maximum of 2 hours (120
minutes).
WIND
By pressing the WIND button, the vertical air vent will move from left to right to
spread the air flow.
COOL
Make sure that there is clean water (and ice packs if preferred) in the water tank before
using the cool function. When you press the COOL button, the water pump will pump
water to the honeycomb filter to obtain a cool air flow.
NEGATIVE IONS
When the air cooler is switched on, the negative ions will start working to purify the
air from dust.

CLEANING AND MAINTENANCE

• Remove the plug from the socket before cleaning the appliance.
• Remove the honeycomb filter. Clean the filter every 1 or 2 months if the
environment is susceptible to dust and dirt. Wash the filter in slightly soapy water,
with a soft cloth. Rinse well, so that all soap residues are removed. Let the filter
dry for at least 4 hours before placing it back into the air cooler. When placing
back the filter, make sure that the black circle in the filter is at the front (pointed
towards you), and the black square is at the back (inside the appliance). This way,
the filter is placed correctly into the appliance.
• The dust filter can be cleaned with water and a soft brush. Dry thoroughly before
32