Idiomas disponibles
Idiomas disponibles
9
After the wheels have been installed, adjust the level of the glass panel using the eccentric mechanism of the rollers. Insert
the smaller allen key in the hole on the side of the roller, then use the bigger allen key to slightly loosen the roller by turning it
counter clockwise. Rotate the roller clockwise using the smaller allen key to raise the glass. To lower the glass, rotate the roller
counter clockwise using the smaller allen key. After the adjustment is done, using the smaller allen key to hold roller rotation,
while turning the bigger allen key clockwise carefully
When the eccentric backside of the wheel is in
this position, it has reached the "highest" glass
LEVELING THE GLASS PANEL
1
HELPFUL HINT!
position.
1
2
HELPFUL HINT!
When the eccentric backside of the wheel is in
this position, it has reached the "lowest" glass
position.
2
PAGE 19
