Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7.
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE.
7.1
Check the polarity of the battery posts. The POSITIVE (POS, P, +) battery
post usually has a larger diameter than the NEGATIVE (NEG, N, -) post.
7.2
Attach at least a 24-inch long 4 gauge (AWG) insulated battery cable to
the NEGATIVE (NEG, N, -) battery post.
7.3
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +)
post of the battery.
7.4
Position yourself and the free end of the cable you previously attached to
the NEGATIVE (NEG, N, -) battery post as far away from the battery as
possible – then connect the NEGATIVE (BLACK) charger clip to the free
end of the cable.
7.5
Do not face the battery when making the final connection.
7.6
When disconnecting the charger, press the START/STOP (
turn the output off, disconnect the AC cord, remove the clip from the cable
attached to the negative battery terminal and then remove the clip from
the positive battery terminal.
7.7
A marine (boat) battery must be removed and charged on shore. To
charge it onboard requires equipment specially designed for marine use.
8.
BATTERY CHARGING - AC CONNECTIONS
8.1
This battery charger, with auto line voltage select function, is for use on
nominal 120 volt and 240 volt circuits.
DANGER – Never alter AC cord or plug provided – if it does not fit the
outlet, have proper outlet installed by a qualified electrician. Improper
connection can result in a risk of an electric shock or fire.
8.2
Recommended minimum AWG size for extension cord:
•
100 feet long or less - use an 12 gauge extension cord.
•
Over 100 feet long - use a 8 gauge extension cord.
A spark near the battery may
cause a battery explosion. To
reduce the risk of a spark near
the battery:
Risk of electric shock or fire.
6
•
•
) button to
Tabla de contenido
Solución de problemas
