Orbegozo DH 1240 Manual De Instrucciones página 25

DH 1240
TROUBLESHOOTING
SYMPTOM
 Check the power connection
securely.
The unit does not
 Check if the TANK FULL
work indicator is on.
 Check the room
temperature.
 Is the air filter clogged?
Malfunction
 Is the air inlet or outlet grille
obstructed?
No air enters
 Is the filter clogged?
 Is the machine placed on a
Loud noise when
platform?
running
 Is the filter clogged?
 Humidity sensor damp or
E2
faulty.
 Displayed when the relative
LO
humidity is less than
20%RH.
 Displayed when the relative
Error code HI
humidity is higher than
90%RH.
 Displayed when the ambient
CL
temperature is below 5°C.
 Displayed when the ambient
CH
temperature is higher than
38℃
INSPECTION SOLUTION
 Insert the power cord securely into the wall
socket.
 Empty the tank and reinstall it correctly.
 The operating temperature range is 5-35℃.
 Clean the air filter as indicated
 Remove obstruction from vents
 Wash the filter
 Place the machine on the ground
 Wash the filter
 Clean or replace the humidity sensor.
 The dehumidifier turns off
25