Idiomas disponibles
Idiomas disponibles
3. BEFORE USE
•
Take the product out of the box.
•
Remove all packaging materials. Keep the original box.
•
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
•
Keep a distance of at least 10 cm between hair and air inlet, to avoid hair from entangling
into the hair dryer.
4. OPERATION
•
This hair dryer releases ions, which protect hair, skin and seal cuticles for a total care of
your hare during use.
•
This product is equipped with 360º spinning magnetic nozzles. Install these when the
device is off and has fully cooled down.
•
This product is also equipped with an ExtremeProtect function which enables automatic
temperature oscillation.
1.
Place the on/off button (6) in the off position, plug the power cord into a socket then press
the on/off button (6) to switch the device on.
2.
This device has 3 different speed modes and 3 different temperature modes.
3.
Press the speed control button (8) once to select the low operation speed, press again to
select the medium operation speed and 3 times to select the high operation speed. The fan LED
on the device will light up accordingly.
4.
Press the temperature control button (5) once to select the low operation temperature.
Press the temperature control button again to select the medium operation temperature.
Press the temperature control button 3 times to select the high operation temperature. The
temperature indicator LED on the device will light up accordingly.
5.
Press the (
twice to select the oscillating warm-cold air function. Press the (
ExtremeProtect function. The LED indicator on the device will light up/switch off accordingly.
6.
Keep a distance of at least 10 cm between hair and air outlet to avoid tangling or risk of burning.
7.
After using, switch the hairdryer to the off position and unplug the power cord.
5. CLEANING AND MAINTENANCE
•
Disconnect the appliance from the power supply and allow it to cool down before cleaning.
•
Use a soft, cotton cloth to clean the product's inlets and outlets.
•
Do not use sharp tools near the inlets and outlets of the product to avoid damage.
•
Do not immerse the appliance in water or other liquid.
•
Do not use abrasive scouring pads, powders or cleaners.
•
Do not immerse the appliance in water and do not expose it to water while cleaning it.
04226_04227_Bamba IoniCare 6000 Rockstar Fire_Ice_YV02190902.indd 15
)(9) button once to activate the cold air function. Press the (
) (9) again to switch off the
BAMBA IONICARE 6000 ROCKSTAR FIRE/ICE
ENGLISH
)(9) button
15
5/9/19 16:31
