Idiomas disponibles
Idiomas disponibles
CONFIGURATION LOCK-OUT
Lock-out menu
In order to prevent accidental or indesirable modifications of instrument parameters, a selective or total
configuration lock-out is available. By default the unit is delivered unlocked, giving access to all programming
levels. Once in this menu, the first option will be to choose between lock-out level setting ("LiSt") or security
access code changing ("CHAn").
LiSt
tLoc
no
yES
SEt1
no
yES
SEt2
no
yES
InP
no
yES
dSP
no
yES
SERIE KOSMOS
If "LiSt" option is selected, display will show momentarily
CHAn
"tLoc". Total configuration lock-out is activated by
selecting "yES" option before the unit goes back to RUN
mode. When total lock-out is set, no data can be
entered or modified, although it will still be possible to
visualize
0000
conditions when entering main menu, initial indication will
be "dAtA" instead of "Pro".
On the other hand, when "no" option is selected, routine
move on to next step to configure a partial lock-out.
When a partial lock-out is set, only non-locked data
can be entered or modified. Under these conditions
when entering main menu, initial indication will be "Pro".
The following configuration access can be locked-out:
• Setpoint 1 configuration (SEt1)
• Setpoint 2 configuration (SEt2)
• Input configuration (InP)
• Display configuration (dSP)
In each case lock-out is activated by selecting "yES" option and
deactivated by selecting "no".
Setpoints 1 and 2 configuration lock-out is available only when 2RE
output is installed.
If 2RE output option card is uninstalled, the instrument keeps setpoints
last configuration in memory, though it can not be visualized. There will
be no need to reconfigure setpoints lock-out when 2RE output option is
again installed if the same configuration is required.
Once the instrument programming is completed, if there are
parameters that are going to be frequently changed, a partial lock-out
is recommended. A total lock-out is recommended when configuration
parameters will be constant for a long time.
Changing default security code and keep new one in a safe place is
also strongly recommended.
www.ditel.es
JR-P / JR20-P
all
programmed
parameters.
Under
these
65
