Hitachi KPI Serie Manual De Instalación Y Funcionamiento página 18

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
8. CHECKING PRODUCT RECEIVED
Upon receiving this product, inspect it for any shipping damage.
Claims for damage, either apparent or concealed, should be field
immediately with the shipping company.
Check the model number, electrical characteristics (power supply,
voltage and frequency) and accessories to determine if they are
correct.
The standard utilisation of the unit shall be explained in these
instructions.
9. SAFETY SUMMARY
WARNING
Do not perform installation work and electrical wiring connection
without referring to the Part II Installation of this Installation and
Operation Manual.
Check that the ground wire is securely connected.
Connect a fuse of specified capacity.
18
PMML0185 rev.1 - 03/2010
PART II- INSTALLATION
Therefore, the utilisation of the unit other than those indicated in
these instructions is not recommended.
Please contact your local agent, as the occasion arises.
HITACHI's liability shall not cover defects arising from the alteration
performed by a customer without HITACHI'S consent in a written
form.
CAUTION
Do not install the unit, remote control switch and cable within
approximately 3 meters from strong electromagnetic wave
radiators such as medical equipment.
CHECKING PRODUCT
RECEIVED
loading