Idiomas disponibles
Idiomas disponibles
CLEANING THE FILTERS
For optimal results, you should clean or replace the filter after every 2 to 3 vacuuming sessions, or more
often if it appears that the filter is visibly clogged. This also prevents the engine from overheating.
1. First empty the dust collector, see previous chapter.
2. Open the filter cover, see Figure 3B on page 2.
3. Remove the dust separation system from the dust collector, see figures 3B and 3C on page 2.
4. Remove the filter from the dust separation system, see image 3D on page 2.
5. Rinse the filter and dust separation system thoroughly in lukewarm water. Let the filters dry thoroughly.
6. Reassemble everything in reverse order.
NB:
•
Dry everything thoroughly so that moisture cannot enter the device and cause damage.
•
Never clean the filters in the washing machine.
•
Never dry the filters with a hairdryer.
CLEANING THE EXHAUST FILTER
Replace the exhaust filter at least twice a year, or more often if it appears that the filter is visibly clogged.
1. Open the exhaust filter cover by turning the wheel cover counterclockwise. Pull the exhaust filter out of
the device, see figure 4 on page 2.
2. Rinse it clean in lukewarm water. Let it dry thoroughly.
3. Replace the cleaned filter and turn the lid clockwise until it clicks into place.
NB:
•
Dry everything thoroughly so that moisture cannot enter the device and cause damage.
•
Never clean the filter in the washing machine.
•
Never dry the filter with a hairdryer.
CLEANING THE VACUUM CLEANER
1. Clean the outside of all parts with a damp cloth and a cleaning agent suitable for plastic. Make sure that
no moisture gets inside the device.
2. Over time, dust and dirt can accumulate on the wheels, causing them to no longer turn properly. So clean
it well.
NB:
•
Never immerse the appliance, the plug or the cord in water.
•
Do not use aggressive or abrasive cleaning agents or sharp objects when cleaning.
STORING THE VACUUM CLEANER
1. Remove the plug from the socket.
2. Press and hold the rewind button to automatically rewind the cord.
3. Slide the tube together.
4. Slide the combination nozzle into the mounting slot on the back of the vacuum cleaner to easily store and
retrieve the vacuum cleaner without having to take all the parts apart.
NB:
Guide the cord as you rewind it. Otherwise, the cord may become tangled or the plug may hit the back of
the appliance. Hold the cord loosely in your hand at the marking and let it slide through your fingers in a
controlled manner.
18
EN
