Idiomas disponibles
Idiomas disponibles
PUSH PULL
707 mm
583 mm
230 mm
601 mm
(*) only for model F1WD30**
PRO HANDLE
707 mm
583 mm
230 mm
631 mm
750 mm
264 mm
754 mm
(*) 745 mm
750 mm
264 mm
758 mm
27
Installation procedure
Before you begin assembling the drawers of the
appliance, make sure there is enough room to fit the
drawer and the appliance.
The precise dimensions for the installment are indicated
in inches and mm.
Install an anti-tip block against the rear cabinet wall.
Verify screws are adequately secured and do not
penetrate electrical wiring or plumbing.
=
• Turn power off to the electrical outlet.
• Insert plug into three-prong, grounded outlet (see
"Power Requirements and Grounding" on page 2 for
electrical specification).
• Position the drawer so that it is directly centered and
slide warming drawer assembly into cutout until it is
flush with cabinet.
• Avoid pinching the power cord between the unit and
cabinet wall.
• Open the warming drawer to full extension and fix the
structure to the wall with the four screws provided.
=
580 mm
GB
