Trouble Shooting; Malfunction Table; After-Sales Service; Accessories For Circulating-Air Mode - BALAY 3BT730.P Instrucciones De Uso

Trouble shooting

Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.

Malfunction table

Problem Possible cause Solution
The appliance The plug is not
does not work plugged in.
Power cut
Faulty fuse
The lighting The bulbs are
does not work. faulty.
--------

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate with these numbers can be
found inside the appliance (remove the metal mesh grease
filter to gain access).
You can make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
E no.
O
After-sales service
Please be aware that a visit by an after-sales engineer will be
charged if a problem turns out to be the result of operator error,
even during the warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.

Accessories for circulating-air mode

(not included in the delivery)
8
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is OK
For information on chang-
ing the bulbs, see the
"Replacing Bulbs" section.
FD no.
LZ26000

Replacing bulbs

:
Risk of electric shock!
When changing the bulbs, the bulb socket contacts are live.
Before changing the bulb, unplug the appliance from the mains
or switch off the circuit breaker in the fuse box.
Important Only use a bulb of the same type and same power
(see also the bulb holder or rating plate).
Replacing halogen bulbs with screw base
Notes
To replace the bulbs, do not remove the plastic cover. The
■
bulbs can be accessed from inside by removing the metal
grease filter.
When inserting halogen bulbs, do not touch the glass tube.
■
Use a clean cloth to insert the halogen bulbs.
Allow the bulb to cool down.
1.
Remove the metal grease filter.
2.
Unscrew the bulb and replace it with a bulb of the same type.
3.
Refit the metal grease filter.
4.
Insert the mains plug or switch on the fuse again.
5.
Replace the bulb with one of the same type:
Voltage: 240 V
Power: max. 28 W
Thread: E14